INSULATED PANELS
Roof Panels
Metl-Span architectural panels serve as walls and roofs for high-profile applications in new and
retrofit construction.
Metl-Span's foamed-in-place technology offers the most thermally efficient architectural panels available, placed outboard of the structural supports for a continutous barrier with no compressed insulation or thermal bridges. Most panel profiles may be installed either horizontally or vertically with concealed clips and fasteners in the side joint for a beautiful flush appearance.
Architectural
The Metl-Span Architectural/Horizontal insulated metal wall panel is ideal for high profile horizontal applications. Designed to install with concealed clips and fasteners in the
side joint.
Architectural/Horizontal wall panels provide maximum design flexibility and a beautiful high-tech appearance. The horizontal interlocking joint can be varied for visual impact. It may be ordered flush or with a 3/8" deep reveal of 1/4", 1/2", 3/4", 1", 1 1/2", 2", 2 1/2", or 3" width. The panel ends are folded to eliminate the need for metal trim at the vertical butt joint. The joint is sealed with a black dry gasket to create a shadowline effect that can be emulated in the horizontal reveal.
Striated
The Metl-Span Striated insulated metal wall panel is an attractive and economical alternative to typical flat wall panels. The exterior face is lightly profiled with narrow longitudinal striations and exhibits a virtual flat appearance from a short distance away. The Striated wall panel is an exceptional value combining the aesthetics of a flat wall panel and high insulation ratings of a polyurethane core.
Note: Not intended for exterior walls on cold storage buildings.
Santa Fe
The Metl-Span Santa Fe® insulated metal wall panel has a flat exterior profile with a heavy embossed, stucco texture that mimics the look of a masonry stucco finish.
Note: Not intended for exterior walls on cold storage buildings.
HPCI Barrier
The HPCI Barrier™ insulated metal panel is an air, water, thermal and vapor barrier panel that can be used behind any type of facade. The HPCI Barrier back-up panel is installed in a horizontal orientation completely outside the structural supports. There are no thermal bridges to reduce the energy efficiency of the wall. HPCI Barrier is quick and easy to install and provides an economical solution to conventional air, water, thermal and vapor control without sacrificing thermal efficiency.
7.2 Insul-Rib™
The 7.2 Insul-Rib™ insulated metal wall panel combines a traditional 7.2 rib panel design with a polyurethane foam core. For the first time, this widely used profile is now available with exceptional insulating properties in various thicknesses.
Mesa
The Metl-Span CF Mesa and Light Mesa insulated metal wall panels are well suited for exterior and interior partition wall applications. The lightly corrugated profile on both faces of the panels ensures symmetry from outside of the building to inside, and from room to room in partition installations. The CF Mesa and Light Mesa wall panels may be used for exterior wall applications, but they are not recommended for use on exterior walls of low temperature buildings.
CF Fluted
The ribbed profile of the Metl-Span CF Fluted insulated metal wall panel provides bold vertical lines complementary to almost any commercial or industrial building. The CF Fluted wall panel is the recommended profile for the exterior of cold storage buildings.
CFR Roof Panels
Metl-Span CFR is an insulated metal standing seam roof panel, and is the foremost innovation in all-in-one composite panel design, combining durable interior and exterior faces with Metl-Span's unmatched polyurethane core.
The CFR roof panel provides exceptional benefits including a standing seam exterior face for unsurpassed weathertight performance, and panel widths contributing to installation savings because there are fewer side joints to seal. CFR roof panels are installed completely from the top side with concealed clips and fasteners placed in the side joint. Cold Storage applications may require alternate methods of attachment. Factory cut panel ends, factory notching and factory swaged ends eliminate critical and extensive field reworking and reduce erection costs. Factory installed backer plates at the endlaps also eliminate pre-drilling for special fasteners and fastener tools.
Careful design parameters have enabled Metl-Span to create an incomparable roof system that is easily and quickly installed without dependence on highly skilled labor.
Tuff Wall®
Tuff Wall® is an exceptionally attractive stucco-like insulated metal wall panel that exhibits the natural beauty that many designers and owners prefer. The exterior stucco-like surface of the panel is a hard aggregated fiber reinforced polymer coating created with the factory applied Tuff Cote® finish system. Tuff Cote finish offers an extremely durable impact and abrasion resistant coating that withstands severe weather conditions.
Unlike field-applied finishes that are vulnerable to damp or cold weather during installation, Tuff Wall panels can be erected in virtually any weather condition. The interior face of the Tuff Wall panel is finished with an attractive Mesa profile and painted with a white polyester coating.
Tuff-Cast™
Tuff-Cast™ is an exceptionally attractive insulated metal wall panel with the look of finished precast concrete. The exterior surface of the panel is a hard aggregated fiber reinforced polymer coating created with the factory applied Tuff Cote® finish system. Tuff Cote® finish offers an extremely durable impact and abrasion resistant coating that withstands severe weather conditions. Unlike field-applied finishes that are vulnerable to damp or cold weather during installation, Tuff-Cast™ panels can be erected in virtually any weather condition. The interior face of the Tuff-Cast™ panel is finished with an attractive Mesa profile and painted with a white polyester coating.